New device Support
------------------
Macronix MX27C8000.

Bug Fixes
---------
None.

Other changes:
--------------
Generating SHA-1 is slightly faster for all 8/16 bit devices:
                 V4.20         V4.30 
SHA-1 27V322 - 37min 38s     35min 41s
SHA-1 27C240 -  4min 38s      4min 26s
SHA-1 27C801 -  9min 17s      8min 49s

Some more notes:
1.Little / Big Endian selection:
  Little Endian (Low High) - press FUNC green SUM or type VL.
  Big Endian    (High Low) - press green SUM or type VH.
2. Press QUICK or type CR to generate standard device (ZIF) checksum.
3. Press DUMP or type QB to print signature.
   Press FUNC DUMP or type DU to dump device in ZIF.

Installing the Latest Library
-----------------------------

To install this new Library software into S4, a new Library ROM needs to
be created.  This procedure is described below:

1. Download SHA1V431.HEX (or CRCV431.HEX) to S4 in the normal way.
   SHA1V431.HEX (or CRCV431.HEX) is an Intel Hex file. The data will
   reside between addresses 08000-0FFFFH.

2. Do a RAM checksum (Grey SUM key) from 08000 to 0FFFF:

>CHECKSUM RAM
08000,0FFFF

The resulting SUM should be: 002CD29A for SHA1V431.HEX 
                         or  002CE4AB for CRCV431.HEX.

3. BURN a (blank) 27256 from 08000-0FFFFH:

>BURN
AMD 27C256
12.75V Burn pin 1
 08000-0FFFF=00000

4. Do a ROM checksum (Green SUM key).  The SUM should be the same as the
RAM checksum above.

5. With the freshly Burnt Library ROM in S4's ZIF socket, press LIB, and
then ENTER.  The Library program will now load, and S4 should the
display the following sign-on message:

DATAMAN S4 LIB 
VALIDATOR-32 V4.31
XXXK BYTES RAM
>

"But my S4 has lost it's Library, I can't BURN a 27256"
-------------------------------------------------------

No problem.  When S4 has no Library loaded, it is possible to program a
27256 at 12.5V, using a 500us pulse width.  This is suitable for most,
but not all 27256 EPROMs.  If you do program a 27256 with no Library
loaded, MOVE the Library code down to address 00000 before BURNing:

>MOVE 08000,0FFFF,00000

If you don't fancy actually BURNing an EPROM at all, there is another
way to install a Library into S4. S4 has the facility to load directly 
from the serial port into its library memory, using the S4 driver for
Windows and the Receive Library function.

If you require further help on re-loading the Library, please contact 
me at the below email address.

Dataman Programmers Ltd
Unit 2 Newton Hall
Dorchester Road
Maiden Newton
Dorset. DT2 0BD
U.K.
Tel: +44 (0)1300 320719
Fax: +44 (0)1300 321012
Email: support@dataman.com
Web: www.dataman.com   

Tue 01/02/03 Dataman Programmers Ltd E&OE